When using plastic bottle crushers, you should pay attention to the four usage specifications.

First, when the plastic bottle crusher is in use, all equipment must be checked before turning on the power. To
For example, the wear status of the parts, whether the screws are loose, whether the lubricating oil needs to be added, etc. The sequence of the switching power supply cannot be mistaken. To otherwise, the equipment will not operate smoothly.

Second, the supply speed should be appropriate, not too fast or too slow, too fast and easy to be blocked; too slow will cause the equipment to run idle. The efficiency will decrease, the supply speed should meet the equipment processing requirements, and the supply granularity should meet the equipment production requirements, not too large Or too small.

Third, pay attention to the adjustment of various parameters.
For example, the speed of the equipment cannot be too fast or too slow.
In addition, in production, the requirements for production capacity and product quality must be considered simultaneously, and certain parameters cannot be too large or too small.

Fourth, perform regular maintenance, regularly add lubricating oil, periodically clean the fuel tank, and shut down each time, first stop supplying materials in the crushing room, and then shut down the host.
This article mainly introduces the problems that should be paid attention to when using plastic bottle crushers in production. Regarding the analysis of this problem, we primarily research four aspects. To
These aspects cover the requirements of production capacity and product quality and cover the issues that should be paid attention to during the safe production of equipment.

Eight standard precautions for plastic crushers.

1. Before starting, use human power to move the transmission wheel, confirm that the movement is flexible, and then begin and wait for the crusher to run generally before feeding. To
2. Before stopping the operation, stop the supply, remove the materials in the machine, and cut off the motor's power supply.
3. Pay attention to the bearing temperature during operation so that the approach maintains a good lubrication state and pay attention to whether the sound and vibration are abnormal. To
When you find an abnormal situation, you should stop to check whether it is stuck on an unbreakable object or whether it has damaged parts. To
4. Keep the crusher's feed evenly, prevent overloading, and strictly prevent metal and wood that cannot be crushed from falling into the machine. To
When it cannot be broken, the water supply cannot be too high. When it is wetly broken, it is necessary to maintain an appropriate amount of water to prevent insufficient water from forming a blockage and reduce production capacity. To
5. Check whether the particle size of the broken product meets the requirements. To
When there are too many particles exceeding the prescribed size, the reasons (huge sieve gap, vast discharge port, wear of the hammer, etc.) should be found, and appropriate measures should be taken to eliminate them. To
6. When the crusher is shut down, check whether the fastening bolts are firm and the degree of wear of the parts that are easy to wear. To
For the tooth crusher, it is necessary to use the parking opportunity to remove the wood sandwiched between the teeth. To
7. Worn parts should be replaced or repaired in time. To
8. The safety device of the crusher must be kept in good condition, not for the sake of saving trouble; otherwise, the safety device will become invalid.
For more crusher industry information, please Follow or contact packer.