According to different crushing requirements, there are mainly three types of plastic shredders.
1. Plastic pipe plastic shredder & technical characteristics.
1. Suitable for destroying various small and medium-sized plastic pipes, such as PE, PVC pipes, silicon core pipes and other pipes.
2. The round-tube feed port planned for the destruction of pipe plastics facilitates the destruction of long-length pipes and improves working power. Optional suction fan and storage bucket constitute a pipe destruction recovery system, which can more fully utilize the recovery power.
3. Sealed bearings are selected to make the bearings durable for long-term rolling; proper knife-shaped planning can make the products evenly granulated; the heat-shrinking treatment of the knife seat makes the appearance planning beautiful and generous.
2. Hard plastic crusher, this machine is suitable for destroying all kinds of small and medium-sized plastic plates.
1. ABS, PE, PP and other boards are damaged and recovered.
2. The rectangular feeding port planned for the destruction of long strips facilitates the destruction of long strips and improves working power. Optional suction fan and storage bucket constitute a plate destruction recovery system, giving full play to the recovery power.
3. The use of sealed bearings makes the bearing rolling more durable; the knife shape planning is reasonable, and the product is evenly granulated; the knife holder is heat-shrink, and the shape is beautiful and generous.
3. Powerful plastic shredder.
1. The structure of the sheet knife is between the claw knife and the flat knife, which is suitable for crushing plastic products such as ordinary sheets, pipes, profiles, plates and packaging materials.
2. The general-purpose plastic crusher adopts sealed bearings to make the bearings rolling for a long time.
3. The design of the knife shape is reasonable, the alloy steel blade is selected, the product is uniformly granulated, the knife holder is heat-shrink, and after a rigorous balance test, the appearance is beautiful and generous.
Technical characteristics and wide application range of plastic shredder
Plastic crushers are generally used for crushing various plastics and rubbers. The pellets can be directly extruded as raw materials for production.
The purpose and characteristics of the plastic shredder.
1. The structure of the sheet knife is between the claw knife and the flat knife, which is suitable for crushing plastic products such as ordinary sheets, pipes, profiles, plates and packaging materials.
2. The design of the knife shape is reasonable, the alloy steel blade is used, the product is uniformly granulated, the knife holder is heat-shrink, and it has undergone strict balance experiments.
3. The plastic shredder saves time and is immediately recycled within 30 seconds, without waiting for centralized shredding, and it is clean and clean.
4. In terms of improving the quality of the plastic grinder, the nozzle material will be oxidized and humidified (absorb water) after being taken out at a high temperature, which will destroy the physical properties. nearest recycling within 30 seconds can reduce the physical strength and reduce the damage of the colour gloss.
5. Save money: Recycling in a short period avoids pollution and the alarming rate caused by mixing, which can reduce the waste and loss of plastic, labour, management, storage, and purchase funds.
6. The general-purpose plastic shredder adopts sealed bearings to keep the directions running well for a long time.
7. Simple structure: easy to disassemble design, change colour and material, tiny and small, suitable for use next to the machine in a small workshop.
8. It adopts a medium-speed motor, low noise and low energy consumption; the engine is equipped with an overload protection device and a power supply chain protection system, which is safe and reliable in operation and cleaning.
9. Plastic shredders are widely used in plastics, chemicals, resource recycling, and other industries. Suitable for soft and rigid polyvinyl chloride PVC, high and low-pressure polyethylene PE, polypropylene PP, atactic polypropylene PPR, nylon PA, polycarbonate PC, polystyrene PS, styrene-butadiene ABS, foamed PE, PVC, SBS, EVA, PPS crushing and processing of magnetic cards, leather, rubber and other materials.